stillplane.blogg.se

1. #Innovage outdoor radio users manual manual#
2. #Innovage outdoor radio users manual tv#
3. #Innovage outdoor radio users manual free#

WARNING: THE POWER ADAPTORS ARE FOR INDOOR USE ONLY. If there is no signal from the remote control unit in 5 minutes, the speakers will automatically power off. You can switch on the speakers again by using the remote control unit during the stand-by time. P.4 P.5Ĥ use the remote control unit to turn off the speakers, the speakers will be at stand-by mode for 5 minutes and the LED will be changed from blue to yellow. b) Whenever you find frequency jam, move your channel switch from one channel to the other channel (there are two channels for selection) on the transmitter, and then press the AUTO-TUNE button again. Place back the cover and close the battery compartment. Remove the battery cover at the rear of the remote control unit and insert 2 pieces AAA size batteries (not included) into the battery compartment with the correct polarity. NOTE : a) Keep a distance of the speakers up to 7 meters apart from the transmitter, and then press AUTO TUNE button for the best reception. There are two holes at the back of each speaker for you to hang them on the wall. Volume can be adjusted up by pressing + button or down by pressing the button - to the desired listening level, or you can press the + button or - button on the remote control unit to adjust the volume level. To suit the needs of different users, these speakers are designed for wall 4. Switch off the speakers by pressing the ON/OFF button on the speakers or on the remote control unit, and the LED will be off. Press On/Off button and turn the speakers ON. Tuning process can also be activated by pressing the AUTO TUNE button on the remote control unit. When the button is pressed, frequency tuning starts automatically and it stops when a signal is detected. Press the AUTO TUNE button to get the best tuning reception in the speakers. Turn on the ON/OFF button on the speakers (the ON/OFF button on the remote control unit cannot be used as a primary device to switch on the speakers). Select the channel 1 or 2 of the transmitter for best performance in your location. The blue signal LED on the transmitter will light up.

Turn on the audio source (TV or audio component) to which the transmitter is connected with. Insert 6 pieces C size ALKALINE battery into the battery compartment with correct polarity at the bottom of each speaker (batteries not included in the package) or connect the 9V power adaptor to the DC input jack on the bottom of each speaker, then plug it to the wall AC outlet. If the blue SIGNAL LED does not illuminate, ensure the audio source is turned on. When the transmitter received an audio signal, the blue SIGNAL LED and the red POWER LED will illuminate together. The rear of the transmitter has one audio cord that can be connected to audio output jack of TV, Monitor, VCR, Radio recorder, CD/MP3/VCD/DVD players or to headphone/earphone jack with the connector provided. If the red POWER LED does not illuminate, make sure the adapter is plugged in. When the AC adapter is plugged in, the red POWER LED illuminates. Plug the AC/DC power adaptor in the DC jack located on the rear of the transmitter. Connect the supplied AC/DC power adaptor to an electrical wall outlet. Signal On Indicator (blue) Power On Indicator (red) SPEAKER RECEIVERS AUTO TUNE POWER ON/ OFF REMOTE CONTROL POWER ON/ OFF VOLUME UP VOLUME UP VOLUME DOWN AUTO TUNE VOLUME DOWN 2. Insert the antenna tube into the antenna wire.

#Innovage outdoor radio users manual manual#

User s Manual P.1Ģ COMPONENT IDENTIFICATION TRANSMITTER Antenna INSTALLATION TRANSMITTER 1.

#Innovage outdoor radio users manual free#

Virtually interference free audio quality. RF technology lets you roam freely throughout your house, garden. Phase Lock Loop (PLL) transmission system on transmitter MHz Digital Hybrid RF technology speakers system.

Automatic Phases Lock Loop (PLL) scanning system on speaker receivers 3. Weatherproof indoor and outdoor speakers. Without complicated wiring and installation with your Audio/Video equipments and rear channel amplifier, the system enables you to enjoy thrilling, lifelike sound in minutes. You can simply connect the system to any audio source such as Radio, TV, VCR, Hi-Fi and CD/MP3/VCD/DVD player.

#Innovage outdoor radio users manual tv#

1 SP MHz Digital Hybrid Wireless Outdoor Speakers INTRODUCTION This 863 MHz digital hybrid wireless speaker system uses latest wireless technology that enables you to enjoy music and TV sound anywhere inside or outside your home.